I got quite frustrated during the strip-out because there was no easy way to disconnect the multi-switch/fuse panel or engine control panel from their respective wiring harnesses. Each individual wire need to be unscrewed or pulled off a connector spade.
I wanted something that tidied wires away and grouped them into connectors for easy uncoupling. Searching the internet I found a multitude of connectors for as much as you want to spend! I opted to try something like an automotive connector for the navigation station as it will always by dry.
The connectors are available quite cheaply and are fairly simple to use. I was a bit concerned about how fiddly they might be, but in the end, it was pretty straightforward: crimp the wire into the pin/socket and push the pin/socket into the connector block (where it locks into place). Hopefully these will last and be relatively maintenance free.
I need to look at a different kind of connector for the mast wires, but that's another post (when I find the appropriate waterproof connector)
